China Car Forums

China Car Forums (https://www.chinacarforums.com/forum/index.php)
-   Nanjing Automobile (https://www.chinacarforums.com/forum/forumdisplay.php?f=23)
-   -   MG7 1.8T engine details? (https://www.chinacarforums.com/forum/showthread.php?t=7952)

terreneuve 10-21-2009 08:40 PM

MG7 1.8T engine details?
 
Is the MG7 1.8T throttle control fly by wire or cable operated??

Was the engine built to meet EU4 specs?

I was also wondering does anyone know which ECU was used for the engine and do they use Testbook diagnostics?

Thanks:lol:

Windy 10-26-2009 09:35 AM

Re: MG7 1.8T engine details?
 
The first MG7 1.8T was a cable operated N Series engine but they now use the SAIC Kavachi version of the engine which is fly by wire. I think there are both EU3 and EU4 versions available depending on where they are sold. (Beijing needs EU4.) Same ECU as before but upgraded to EU4 spec and there is an upgraded Testbook to go with it.

terreneuve 10-26-2009 09:05 PM

Re: MG7 1.8T engine details?
 
Any idea where I could get a used EU4 fly by wire ECU.

I think it's a Siemens unit.

Most of the google hits come up in Chinese.

Thanks

Windy 10-27-2009 05:21 AM

Re: MG7 1.8T engine details?
 
The V6 uses a Siemens unit, the 4 cylinder uses a Motorola MEMS ECU.

The UK MGs, although EU4, are all cable operated so you are restricted to China and Chile at present.

The Chile MG550 will be fly by wire but may be EU3, not sure.

There are not going to be many used ones available, the Chinese repair all their cars when they crash them!

RossTaylor 12-28-2010 06:39 AM

Re: MG7 1.8T engine details?
 
The MG 7 comes in two trim levels: 'Classic' which features a slatted grille, and 'Sport' with a mesh grille. This is with N-Series with stronger head gaskets,


All times are GMT -5. The time now is 10:09 PM.

Powered by vBulletin® Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.