Introduction to the company (from official site).
NAVECO Ltd. (hereinafter referred to as "NAVECO"), as a Sino-Italian joint venture established by Nanjing Motor Group Company and IVECO S. p. A., was founded on March 1, 1996 with the total investment of 3.7 billion yuan. Each party to the joint venture owns 50% of the shares respectively. The company consists of 10 divisions, 2 plants (Assembly Plant, Body Plant) and 3 subordinate companies (Engine Company, Axle Company and Gearbox Company), having more than 3000 registered employees, a land of 516000 m2 and the floor area of 202000 m2 .
The company has a designed production capacity of 60000 IVECO vehicles and 75000 diesel engines covering mainly three product ranges: Power Daily, Daily and Traveler, including more than 200 models of 6 tonnages from 3 tons to 6 tons and 5 kinds of wheel base in segments of light bus, truck, military off-road vehicle, medium bus and special vehicles. Among them, the Power Daily range incorporates not only the comfortability of cars but also the practical features of high performance and capacity of commercial & tourism vehicles. It leads a new round of revolution with respect to the technology of light bus in China.
The company has introduced much modern equipment for machining and inspection, 80% of those from Germany, USA and Italy, which reliably assure the high quality of products. The company has applied the modern managerial system with information technology, like, ERP and e-commerce, and adopted many advanced computer-aid means, such as, CAD,CAE and CAM in a wide scope to boost efficiency.
With quality policy of "Strive for Perfect Vehicles Putting Quality First, Create Famous Brand by Quality and Efficiency Giving Absolutely Priority to Customers" and scientific quality management system, the company has constructed a reliable and effective quality assurance system which passed the certification in accordance with different quality standards applied by the State, industry and army, such as, ISO90001, ISO/TS16949 and GJB9001A standards.
Environment protection is also one value sought by NAVECO. Devoting itself to the development and production of environment friendly vehicles, the company has successively launched vehicles and engines which meet " Euro II" and " Euro III" emission level, based on the environment protection policy "Carry out clean production of environmental-friendly vehicles managing the enterprise by rules, Optimising the green environment continually taking the prevention first".
The environment management system of company has passed thecertification in accordance with ISO14001. The activities relating to environment protection have been audited and accepted with respect to lean production, and the company has won the titles of Jiang Su Environment Friendly Enterprise and Leading Enterprise in Environment Protection.
In the course of construction and development of the company, many leaders of the CPC central committee and the State attached high importance to the growth and development of NAVECO, Hu Jintao, Jiang Zemin, Zhu Rongji, Wu Bangguo, Huang Ju, Li Lanqing, Song Ping, Rong Yiren, Zhou Jiahua, Fei Xiaotong, etc, have inspected the company in succession personally. The company has won the titles of "Excellent Enterprise with Foreign Investment", "Service Unit with Customer Satisfaction" and "Company of Quality Trusted by Consumer ".
Facing the future, the company will make progress unceasingly to achieve a greater success, sticking to the operating notion of "Efficient, Practical, Innovative and Win-Win" and the creed of "the strong gets stronger "
There are 5 production lines in the Assembly Plant: internal trimming line, chassis line, assembly line and inspection line, having a capability of assembling and inspection for 60,000 vehicles per year. The existing equipment assets amounts to 67.95 million yuan, and the land area is 100,000 square meters ( besides this, the testing field of 30,000 square meters) with 30,000 square meters of floor area.
The production lines in Assembly Plant may accommodate the operation of a single products as well as the operation of mixed products. The production timing can be adjusted without interruption according to the need of working task.
In order to guarantee the product quality of IVECO vehicles, NAVECO has introduced many world-class production equipment, such as, the ATLAS tyre nut fastening machine from Sweden, the vacuum filling machine of brake fluid from Italy, the R134a freon filling machine from Germany, the testing apparatuses of Euro III engine from Italy, ABS testing instruments, wind-screen gluing robot. NAVECO has also constructed the A/C testing room, sealing performance testing room, testing ground, and introduced the Hofman testing line from Germany to conduct 100% the inspection of items, such as, axle load, positioning angle, speed, brake, side sliding, light, steering, emission, rainproof and sealing performance. The whole line is controlled through via Siemens Programmed Controller with function of real time data collection, printing, on-the-site monitoring, filing, summarizing, analyzing and control. This inspection passed the national acceptance in Dec.1997 and was rated as the first A Class (top level) vehicle inspection line in the automotive industry, achieving the national standards of exempting from examination for new vehicle registration.
In addition, the plant has been certificated in accordance with different national and military standards, such as, ISO9001, GJB9001A and ISO14001, having a reliable and effective quality and environment assurance system.
The Assembly Plant initiated the campaign of ?glearning-type enterprise?h to cultivate a good learning and enterprising atmosphere by the way of combining the guidance with discussion, lesson-teaching with self-teaching, examination with performance evaluation.
NAVECO Body Plant produces mainly the body and frame of various models in IVECO Daily range and Power Daily range. Its yearly production capacity is 60000 bodies and 200,000 longitudinal beams.
NAVECO Body Plant is a technology-intensive manufacturing plant of modern equipment. It has a certain capability of design, development and prototyping integrating three main processes of stamping, welding and painting. There are more than 600 sets of product equipment, most of which are imported from abroad.
The 3000-ton and 4000-ton pressing machine produced by Clearing UK and WeinGarten Germany can guarantee that the longitudinal beam will be shaped just by one pressing, so that the load ability and safety of vehicle can be reliably assured. We are the first one in Chinese automotive industry to possess the large-size pressing equipment. Three dual-action pressing lines of 1500 tons, 1000 tons and 800 tons that produced by Mecfond and Rovetta Italy carry out the production of big body covering parts of various models.
Body Plant has the complete set of final welding line introduced from ITCA Italy for the Daily range bodies, and the set of final welding line made in Korea for Power Daily range bodies. 17 sets of COMAU welding robots and 5 sets of ABB welding robots carry out the main operation of body welding. With the firm welding and even weld dots, the quality welding of body is ensured.
Most of the body painting equipment is designed and introduced from Italy. The pre-treatment of phosphorization adopts the low-temperature three-element process, and the primer applies the thick-film cathode cataphoresis. The to-and-fro static high-speed spray cup and ABB robot are applied respectively on the two coating lines. The paint film of cataphoresis is thick, and the coating has high ustrousness, can resist against the impact and aging. There are two standard colors for the body painting, Alps white and metallic blue, six optional colors, diamond white, ruby red, grass green, dreaming blue, light green, orange pearl
The advanced lineation machine with 3-dimension measurement is applied to normalize the measurement for body assembly and sub-assembly. The portable 3-dimension measuring machine imported from Metionoi Norway is applied for the positioning and measuring of tooling and jigs. With those, the effective and accurate basis is provided for the quality improvement of body.
The plant has passed the certification for quality management system in accordance with ISO9001 ?F 2000, certification for environment management system in accordance with ISO14001, ?g3C?h certification for compulsory testing on products organized by China Quality Certification Center, and the certification in accordance with National Army Standards GJB-9001A-2001.
In December 2002, the plant was honored with the tile of ?g Environmental Friendly Enterprise of Jiangsu province?h. It passed the acceptance examination for clean production organized by the provincial and municipal Environment Bureaus and the municipal Economy Committee in April 2003, being granted with tiles of ?g Green Grade Enterprise?h and ?g First lot of Environment Friendly Enterprises of Jiang Su province?h.
Engine Branch Company of NAVECO Ltd. is an enterprise specialized in the engine design and production, it is established with the joint investment of Yue Jing Auto (Group) Company and IVECO S.p.A. of Fiat Group. The company is located near the beautiful Yuhua Tai in Nanjing, having a land area of about 120,000 m 2 , and a building area of 50,000 m 2 approximately. There are the automatized lines for the production of cylinder block, cylinder head, crankshaft, connecting rod, camshaft and accessory case, and 4 production line for engine assembling and testing, which are set up with the advanced equipment, inspection instrument and testing facilities of more than 900 units. The company has a yearly production capacity of 75,000 engines and the fixed assets of 1 billion RMB approximately.
Engine Branch of NAVECO Ltd. produces the SOFIM 8140 and 8142 diesel engines which are top-class engines designed and developed by IVECO Italy. Following upon the updating of technology of IVECO Italy, the company has invested 300 million RMB to develop new products and improve quality. The direct injection turbo-charged inter cooling diesel engine 8140.43 was launched successfully in 1998, and passed the intensive testing and reliability testing of 2000 hours in the testing center of IVECO Italy, reaching the emission level of Euro II as the first in China. This engine passed the certification for the conformity of production organized by the State Environment Protection Bureau General, the State Development & Reforming Ministry, and the State Tax Bureau General in August, 2003. The company is the only diesel manufacturer that got this certification in China. At the end of 2003, the company launched the 8140.43S/43N diesel engine that conform to the emission level of Euro III adopting the advanced technology of high-pressure common rail and electronically-controlled injection. The company has had the capacity of mass production of this engine and marketed at home since the first half of 2004 and marketed. Therefore, SOFIM engines continue to hold a leading position in performance and environment protection.
Engine Branch of NAVECO has established a quality system that is suitable for the management of modern enterprise, taking the technology as guide, the quality as root, and the management as means. It got the third party certification of TUV (Shang Hai) and Shang Hai Quality Certification Center according to ISO9001 in May 1998, certification of the State Quality Certification Center according to ISO9001/2000 version in 2000, certification of the environment protection according to IS014001 in April 2002, CQC certification of China Quality Certification Center in Octobor 2003 as the first in the section of vehicle engine manufacturing, and the third party certification of TUV (Shang Hai) according to ISO/TS16949 in December 2003.
The advanced technology, outstanding quality, high reliability and good reputation bring the company a lot of economic returns. Since 1999, the company has exported to IVECO Italy more than 50,000 sets of engine components, such as, cylinder block, crankshaft, cylinder head and camshaft, which meet completely the requirements of IVECO Italy. With the continuous enhancement of production capacity, the SOFIM products are supplied to many vehicle manufacturers except for the production of IVECO vehicles. In the future, there will be more and more manufacturers who will choose the high-quality SOFIM engines.
Following the operation philosophy of ?g honesty, quality, price, service?h, today?fs Engine Branch of NAVECO takes part in the market competition with modern management, remarkable technology advantages and reliable product quality. It is making great efforts to set up an international company, and striving to offer a world-class environment-friendly power to China auto industry.
Engine Company of NAVECO Ltd. introduced the advanced manufacturing process and technology from Italy, and set up the automatized lines for the production of cylinder block, cylinder head, crankshaft, connecting rod, camshaft and accessory case, and 4 production lines imported for engine assembling and testing with the updating equipment, inspection instrument and testing facilities of more than 900 units. The modern manufacturing technology and on-line active measurement are applied widely in the course of manufacturing. Computer-Aided Management is employed to group the pistons and bearings in the course of assembly. ATLAS fastening machines made in Sweden are used in the critical operation for torque control. The active measuring technology of Malpos is widely applied for the measurement of components, and the on-line comprehensive measuring machine is used for cylinder block, crankshaft and connecting rod to measure, group, select and print the dimensions of assembling and shape errors. The testing of engine before delivery from the plant is carried out on the automatized intelligent testing line controlled by computer, which is the first class in China equipping with the advanced facilities, such as, AVL testing bench made in Austria and combustion analysis instrument.
NAVECO Axle Branch is located at the foot of Zhongshan Mountain, which covers the area over 90000 square meters. The equipment values RMB130, 000,000. The branch company mainly produces different kinds of 1-20 tonnage bus, truck chassis and front/rear 4x4 off-road axles. The product scale is wide. The main products include 4x4 series, independent suspension series and non-independent suspension series, tube-type and integrated-type series. The brake system is divided into two series: disc brake and drum brake, having the function of clearance self-adjusting and ABS. The transmission of brake force is not only hydraulic brake but also air brake.
NAVECO Axle Branch Company?fs manufacturing equipment includes not only the soft production line consisting of dozens of processing centers, turning centers and welding robots, but also rigid production line consisting of all kinds of special equipment, which is applicable to process different kinds and different batch of axle parts and is at leading position in the industry. 4-wheel aligner simulates complete vehicle operational status to check parameters of front axle, assuring the quality of axle assembly. 80% processing and testing equipment are imported from German, USA and Italy. The advanced equipments effectively assures product quality.
Besides meeting the demand of domestic IVECO vehicles, NAVECO Axle Branch Company produces axle assembly and parts for Italian IVECO SPA, Zhengzhou Yutong, Shanghai Huizong Heavy-duty Vehicle Company etc. famous manufacturers. The company has the complete ability for products development and technics planning.
NAVECO Axle Branch Company has formed reliable and effective quality system step by step since 1998. It passes ISO991, GJB9001A, ISO/TS 16949 etc. state, industry, military quality standards evaluations.
NAVECO Gearbox Branch Company mainly produces the gearbox assembly for IVECO ?gS?h Series vehicles and 4x4 military off-road vehicles. The yearly production ability is 15000 sets. The overall area is 35000 square meters, and the building area is 18000 square meters. The green area reaches 11200 square meters.
NAVECO Gearbox Branch Company has die-casting line, gearbox shell processing line, 4 gearbox gears processing lines and one plane close assembly line. The gearbox production technology completely introduces from IVECO Italy and follows the tides of IVECO technology. Gear precision is processed under German DIN standard. Main production and test equipments are imported from German, Italy and USA. Processing technics level and test capacity are in the leading position in China.
NAVECO Gearbox Branch Company has its strong product development ability. Up to now the products cover 2826, 2826.5 gearbox assembly, gearbox assembly with overdrive, gearbox with transfer case, remote control gearbox with manual brake assembly, AMT assembly and car gearbox shell altogether 6 series. The Quality has reached the Europe IVECO standards. Among the over 200000 users of IVECO vehicle, the gearbox still has no complaint from customer.
Besides providing gearbox for IVECO vehicles, Gearbox Branch Company also produces gearbox for Suzhou Kinglong, Wuhan Lingyun, JAC, Yangcheng Auto, Hebei Zhongxing etc. manufacturer. Meanwhile the company also develop gearbox shell for Nanjing Fiat.
Insisting on the operational concept of ?gEfficiency, Practicalness, Innovation, Win-win?h, NAVECO Gearbox Branch Company established scientific and sophisticated quality and environment system. It passes ISO991, GJB9001A, ISO/TS 16949 etc. state, industry, military quality standards evaluations. And the company was granted as ?gGreen Plant?h for its environmental achievement.
1) Passenger buses:
Off-road 2045 and 2046 series vehicles
NAVECO will soon introduce refreshed Power Daily.
SAIC merges and overhauls Naveco CV brands
"Russia’s Zavolzhsky Engine Plant has signed a contract with China’s Naveco Company to supply 3,000 engines to China-Italy’s Naveco, the company’s sales director Alexander LBov told reporters at the Moscow Intn’l Motor show on Friday."
The "world-class environment-friendly power" consists of a hybrid electric engine, currently being tested at the Nanjing Automotive Institute:
Hi, please I need know:
Have the Iveco PowerDaily 3.0L F1C engine? or not yet
Re: NAVECO (Nanjing-Iveco)
Nanjing Iveco electric light bus put into use
Iveco 'Venice' minivan:
|All times are GMT -5. The time now is 12:36 PM.|
Powered by vBulletin® Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.