China Car Forums

China Car Forums (
-   Beijing (BAIC) Motor (
-   -   2020 BAW BJ212 New Chassis (

dmitra 05-18-2020 06:40 AM

2020 BAW BJ212 New Chassis
Finally, we have the production versions of the New Chassis BJ212. Since it is a major model change with new underpinnigs, new sheetmetal, changed dimensions, and new-ish interior, I've decided to create a new thread for it, so that it does not get lost among the clutter of old BJ212s, Zhanqis, BJ6460s and BJ2020s in the BAW Introduction thread.

We did come across two other versions of the New Chassis in 2019, one with the old body and one with a sleeker body actually shown first in 2018 (see posts #75 and #65 in the BAW Introduction thread). We can now consider them to be prototypes or test platforms for the new chassis.

For the sake of familiarity and tradition, some aspects of the vehicle have not changed such as the front clip, fenders, rear lights and the cubbyhole boot. The interior, borrowed/adapted from the Yongshi, is already found in its sister models, Zhanqi and Jiaodoushi, as well as in the above-mentioned prototypes. The new design of the side windows is also taken from the Yongshi and an instant differentiator from the old model. For some info on the technical changes, see post #86 of the BAW Introduction thread.

A few months ago, NDRC changed the enterprise code of Beijing Auto Works, including its Dezhou minicar branch, from "BJ" to "BAW", so any codes/models known to us till now, such as BJ2023, BJ2024, BJ2033 etc. will be known as BAW2023, BAW2024, BAW2033 etc.

dmitra 05-18-2020 06:40 AM

dmitra 05-18-2020 06:41 AM

dmitra 05-25-2020 05:25 AM

Re: 2020 BAW BJ212 New Chassis
2 Attachment(s)
2020 BJ212 launched:

The updated range includes four models: 3-door and 4-door with canvas top or hardtop (BAW2033; wheelbase 2460 mm). Additionally, one variant of the old model (BAW2023; wheelbase 2300 mm) has been retained, with 4-door body and traditional "triangle" (actually trapezoid) doors, perhaps keeping in mind the requirements of purists and fans [image for reference].

All five models are powered by the same 1.5T engine.

No website has published pictures of the 3-door New Chassis (production versions) yet; however, I did find a couple of images of what may be a prototype canvas top, photographed in 2019. Note that the rear end is different from the 4-door's (lights, etc.).

Autohome spec page: (Tick "2020" checkbox)

Bitauto spec page: (Tick "2020" checkbox)

Regarding some confusion between the article and spec pages, it requires further study.

dmitra 05-25-2020 01:16 PM

An assortment of new BJ212s. Looks like only the 4-door is being produced and delivered at the moment.

dmitra 05-25-2020 01:16 PM

dmitra 05-25-2020 01:16 PM

dmitra 05-25-2020 01:17 PM
All images from Club Autohome BJ212 sub-forum

dmitra 06-15-2020 03:28 AM

Re: 2020 BAW BJ212 New Chassis
A new variant, 4-door hardtop with 2.4T/211 PS gasoline engine, has been added.

Bterry2134 06-16-2020 04:26 AM

Re: 2020 BAW BJ212 New Chassis
The car looks really cool, the appearence reminds me about the old 1993/97 Land Rover Defender.

All times are GMT -5. The time now is 09:47 PM.

Powered by vBulletin® Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.