China Car Forums banner

BYD F0 & e1

160877 Views 109 Replies 35 Participants Last post by  cornelis.elshot
3
These are spyshots of the replacement for the Flyer, according to the report in Autohome. The reporter noticed the similarity between it and the Toyota Vitz / Yaris.

The new BYD...

http://img.autohome.com.cn/2007/5/16/16-8-54-44-56864101.jpg

http://img.autohome.com.cn/2007/5/16/16-8-54-55-614155841.jpg

The Vitz / Yaris...

http://img.autohome.com.cn/upload/spec/384/w_384504507116.jpg
See less See more
101 - 110 of 110 Posts
Re: Byd F0

Hey, guys.
Could you tell me please, is it difficult to replace the Gur pump of this type ? - https://bit.ly/2TNmTYd . Or is it better to go to the service STATION to do it professionals ? I just want to save some money. So I ask.
2
BYD e1:



http://news.bitauto.com/xinchexiaoxi/20190318/1409324023.html

========================

Hey, guys.
Could you tell me please, is it difficult to replace the Gur pump of this type ? - https://bit.ly/2TNmTYd . Or is it better to go to the service STATION to do it professionals ? I just want to save some money. So I ask.
Always better to employ a professional unless you are absolutely sure you have the skill and tools to carry out the installation correctly. What if, due to faulty or improper fitting and loss of power assist, the car enters into a risky/dangerous maneuver (or fails to perform an evasive steer) and ends up with an accident?
See less See more
hi,
Is there anybody here can give me a review of BYD F0 after years in use? (the one from 2012 is better for me) thanks
My 2014 BYD f0 AMT starts in N,D and R.
But when shifts to Drive ore Reverse the car does not move and stays in N. The Shift Display in the dashboard stays on N.
101 - 110 of 110 Posts
Top