Joined
·
39 Posts
DynoJet Price list : WHO WANTS TO BUY A DYNO !!!!!
All price here in are FOB, LOS ANGELES, CA USA
E-mail for more info, catalog etc at [email protected]
Vincent
________________________________________
MODEL 224X STANDARD FEATURES AND EQUIPMENT
• Measures up to 1,500hp+ and 200mph
• WinPep 7 Software and Hardware to interface (PC, printer, etc. not included)
• Automatic Conditions Measurement (absolute pressure, air temp, humidity)
• Ignition wire inductive tachometer pickup leads
• Auto Tie Down Package (straps, ratchets and ground hooks)
• Wheel Chocks
• Air Actuated Brake System
• Remote Software and Brake Control Pendant
• Installation and operation manuals
• One year replacement parts warranty
• Toll-free technical support
Model 224x $22,500.00
2006 Automotive Dynamometer Price List ADDLR - Page 2
All prices subject to change without notification. All prices in U.S. Dollars. Shipping not included.
Model 224x Automotive Chassis Dynamometer
D y n a m o m e t e r a n d D i a g n o s t i c T e s t E q u i p m e n t
Item Detail Price
Rotary Four-Post Lift Four-post lift used to raise and lower vehicle for use with an above-ground $4,000.00
(SM-123) installed dynamometer. Lift will also function independently from the dyno.
Above-Ground Platform Kit Necessary when using the four-post lift. Consists of a $2,000.00
platform for the rear of the dyno with a lift interface kit
Pit Covers Necessary when installing the dynamometer into a pit/in-ground installation. $800.00
Covers open areas exposing the dyno roller only
Air/Fuel Ratio Monitor Measures real-time air/fuel ratio using high-flow pump w/ sample tube or bung $2,995.00
Eddy Current Load Control Includes the eddy current absorption unit, torque cell, and dynamic load control $15,000.00
software. Perform loaded tests, including step, sweep, and closed loop.
(pit or above ground)
Optical RPM Pickup Includes magnetic base, optical sensor and reflective $300.00
tape. Recommended when testing diesel engined vehicles
Analog Module Expansion module allows datalogging (4) 0-5v channels $750.00
• 0-50psi Absolute Pressure Sensor $100.00
• 0-100psi Relative Pressure Sensor $100.00
Model 224x Automotive Chassis Dynamometer
Optional Accessories
2006 Automotive Dynamometer Price List ADDLR - Page 3
All prices subject to change without notification. All prices in U.S. Dollars. Shipping not included.
D y n a m o m e t e r a n d D i a g n o s t i c T e s t E q u i p m e n t
MODEL 224XLC STANDARD FEATURES AND EQUIPMENT
• Measures up to 1,500hp+ and 200mph
• Eddy Current Load Absorption Unit, Torque Cell, and dynamic load control software. Perform
loaded tests, including step, sweep, and closed loop
• WinPep 7 Software and Hardware to interface (PC, printer, etc. not included)
• Automatic Conditions Measurement (absolute pressure, air temp, humidity)
• Ignition wire inductive tachometer pickup leads
• Auto Tie Down Package (straps, ratchets and ground hooks)
• Wheel Chocks
• Air Actuated Brake System
• Remote Software and Brake Control Pendant
• Installation and operation manuals
• One year replacement parts warranty
• Toll-free technical support
Model 224xLC $36,995.00
Model 224xLC Automotive Chassis Dynamometer
Item Detail Price
Rotary Four-Post Lift Four-post lift used to raise and lower vehicle for use with an above-ground $4,000.00
(SM-123) installed dynamometer. Lift will also function independently from the dyno.
Above-Ground Platform Kit Necessary when using the four-post lift. Consists of a $2,000.00
platform for the rear of the dyno with a lift interface kit
Pit Covers Necessary when installing the dynamometer into a pit/in-ground installation. $800.00
Covers open areas exposing the dyno roller only
Air/Fuel Ratio Monitor Measures real-time air/fuel ratio using high-flow pump w/ sample tube or bung $2,995.00
Optical RPM Pickup Includes magnetic base, optical sensor and reflective $300.00
tape. Recommended when testing diesel engined vehicles
Analog Module Expansion module allows datalogging (4) 0-5v channels $750.00
• 0-50psi Absolute Pressure Sensor $100.00
• 0-100psi Relative Pressure Sensor $100.00
Model 224xLC Automotive Chassis Dynamometer
Optional Accessories
Model 424x All-Wheel Drive Chassis Dynamometer
MODEL 424X STANDARD FEATURES AND EQUIPMENT
• Measures up to 1,500hp+ and 200mph
• Tests vehicles in either two-wheel or all-wheel drive modes
• Above-Ground or Pit installation accessories included
• Consists of two Model 224x chassis dynamometers
• WinPep 7 Software and Hardware to interface (PC, printer, etc. not included)
• Automatic Conditions Measurement (absolute pressure, air temp, humidity)
• Ignition wire inductive tachometer pickup leads
• Auto Tie Down Package (straps, ratchets and ground hooks)
• Wheel Chocks
• Air Actuated Brake System
• Remote Software and Brake Control Pendant
• Installation and operation manuals
• One year replacement parts warranty
• Toll-free technical support
Model 424x $60,000.00
2006 Automotive Dynamometer Price List ADDLR - Page 4
All prices subject to change without notification. All prices in U.S. Dollars. Shipping not included.
Model 424x All-Wheel Drive Chassis Dynamometer
D y n a m o m e t e r a n d D i a g n o s t i c T e s t E q u i p m e n t
Optional Accessories
Item Detail Price
Air/Fuel Ratio Monitor Measures real-time air/fuel ratio using $2,995.00
high-flow pump w/ sample tube or bung
Optical RPM Pickup Includes magnetic base, optical sensor and reflective $300.00
tape. Recommended when testing diesel engined vehicles
Analog Module Expansion module allows datalogging (4) 0-5v channels $750.00
• 0-50psi Absolute Pressure Sensor $100.00
• 0-100psi Relative Pressure Sensor $100.00
Rotary Four-Post Lift Four-post lift used to raise and lower vehicle for use with an above-ground $4,000.00
(SM-123) installed dynamometer. Lift will also function independently from the dyno.
Eddy Current Load Control Includes the eddy current absorption unit, torque cell, and dynamic load control $15,000.00
software. Perform loaded tests, including step, sweep, and closed loop.
Available for front, rear or both.
2006 Automotive Dynamometer Price List ADDLR - Page 5
All prices subject to change without notification. All prices in U.S. Dollars. Shipping not included.
D y n a m o m e t e r a n d D i a g n o s t i c T e s t E q u i p m e n t
Item Detail Price
Air/Fuel Ratio Monitor Measures real-time air/fuel ratio using high-flow pump w/ sample tube or bung $2,995.00
Optical RPM Pickup Includes magnetic base, optical sensor and reflective $300.00
tape. Recommended when testing diesel engined vehicles
Analog Module Expansion module allows datalogging (4) 0-5v channels $750.00
• 0-50psi Absolute Pressure Sensor $100.00
• 0-100psi Relative Pressure Sensor $100.00
Rotary Four-Post Lift Four-post lift used to raise and lower vehicle for use with an above-ground $4,000.00
(SM-123) installed dynamometer. Lift will also function independently from the dyno.
Model 424xLC2 All-Wheel Drive Chassis Dynamometer
Optional Accessories
MODEL 424XLC2 STANDARD FEATURES AND EQUIPMENT
• Measures up to 1,500hp+ and 200mph
• Tests vehicles in either two-wheel or all-wheel drive modes
• Two Eddy Current Load Absorption Units, Torque Cell, and dynamic load control software. Perform
loaded tests, including step, sweep, and closed loop
• Above-Ground or Pit installation accessories included
• Consists of two Model 224xlc chassis dynamometers
• WinPep 7 Software and Hardware to interface (PC, printer, etc. not included)
• Automatic Conditions Measurement (absolute pressure, air temp, humidity)
• Ignition wire inductive tachometer pickup leads
• Auto Tie Down Package (straps, ratchets and ground hooks)
• Wheel Chocks
• Air Actuated Brake System
• Remote Software and Brake Control Pendant
• Installation and operation manuals
• One year replacement parts warranty
• Toll-free technical support
Model 424xLC2 $79,995.00
Model 424xLC2 All-Wheel Drive Chassis Dynamometer
MODEL 248X STANDARD FEATURES AND EQUIPMENT
• Measures up to 2,000hp+ and 200mph
• WinPep 7 Software and Hardware to interface (PC, printer, etc. not included)
• Automatic Conditions Measurement (absolute pressure, air temp, humidity)
• Ignition wire inductive tachometer pickup leads
• Auto Tie Down Package (straps, ratchets and ground hooks)
• Wheel Chocks
• Air Actuated Brake System
• Remote Software and Brake Control Pendant
• Installation and operation manuals
• One year replacement parts warranty
• Toll-free technical support
All price here in are FOB, LOS ANGELES, CA USA
E-mail for more info, catalog etc at [email protected]
Vincent
________________________________________
MODEL 224X STANDARD FEATURES AND EQUIPMENT
• Measures up to 1,500hp+ and 200mph
• WinPep 7 Software and Hardware to interface (PC, printer, etc. not included)
• Automatic Conditions Measurement (absolute pressure, air temp, humidity)
• Ignition wire inductive tachometer pickup leads
• Auto Tie Down Package (straps, ratchets and ground hooks)
• Wheel Chocks
• Air Actuated Brake System
• Remote Software and Brake Control Pendant
• Installation and operation manuals
• One year replacement parts warranty
• Toll-free technical support
Model 224x $22,500.00
2006 Automotive Dynamometer Price List ADDLR - Page 2
All prices subject to change without notification. All prices in U.S. Dollars. Shipping not included.
Model 224x Automotive Chassis Dynamometer
D y n a m o m e t e r a n d D i a g n o s t i c T e s t E q u i p m e n t
Item Detail Price
Rotary Four-Post Lift Four-post lift used to raise and lower vehicle for use with an above-ground $4,000.00
(SM-123) installed dynamometer. Lift will also function independently from the dyno.
Above-Ground Platform Kit Necessary when using the four-post lift. Consists of a $2,000.00
platform for the rear of the dyno with a lift interface kit
Pit Covers Necessary when installing the dynamometer into a pit/in-ground installation. $800.00
Covers open areas exposing the dyno roller only
Air/Fuel Ratio Monitor Measures real-time air/fuel ratio using high-flow pump w/ sample tube or bung $2,995.00
Eddy Current Load Control Includes the eddy current absorption unit, torque cell, and dynamic load control $15,000.00
software. Perform loaded tests, including step, sweep, and closed loop.
(pit or above ground)
Optical RPM Pickup Includes magnetic base, optical sensor and reflective $300.00
tape. Recommended when testing diesel engined vehicles
Analog Module Expansion module allows datalogging (4) 0-5v channels $750.00
• 0-50psi Absolute Pressure Sensor $100.00
• 0-100psi Relative Pressure Sensor $100.00
Model 224x Automotive Chassis Dynamometer
Optional Accessories
2006 Automotive Dynamometer Price List ADDLR - Page 3
All prices subject to change without notification. All prices in U.S. Dollars. Shipping not included.
D y n a m o m e t e r a n d D i a g n o s t i c T e s t E q u i p m e n t
MODEL 224XLC STANDARD FEATURES AND EQUIPMENT
• Measures up to 1,500hp+ and 200mph
• Eddy Current Load Absorption Unit, Torque Cell, and dynamic load control software. Perform
loaded tests, including step, sweep, and closed loop
• WinPep 7 Software and Hardware to interface (PC, printer, etc. not included)
• Automatic Conditions Measurement (absolute pressure, air temp, humidity)
• Ignition wire inductive tachometer pickup leads
• Auto Tie Down Package (straps, ratchets and ground hooks)
• Wheel Chocks
• Air Actuated Brake System
• Remote Software and Brake Control Pendant
• Installation and operation manuals
• One year replacement parts warranty
• Toll-free technical support
Model 224xLC $36,995.00
Model 224xLC Automotive Chassis Dynamometer
Item Detail Price
Rotary Four-Post Lift Four-post lift used to raise and lower vehicle for use with an above-ground $4,000.00
(SM-123) installed dynamometer. Lift will also function independently from the dyno.
Above-Ground Platform Kit Necessary when using the four-post lift. Consists of a $2,000.00
platform for the rear of the dyno with a lift interface kit
Pit Covers Necessary when installing the dynamometer into a pit/in-ground installation. $800.00
Covers open areas exposing the dyno roller only
Air/Fuel Ratio Monitor Measures real-time air/fuel ratio using high-flow pump w/ sample tube or bung $2,995.00
Optical RPM Pickup Includes magnetic base, optical sensor and reflective $300.00
tape. Recommended when testing diesel engined vehicles
Analog Module Expansion module allows datalogging (4) 0-5v channels $750.00
• 0-50psi Absolute Pressure Sensor $100.00
• 0-100psi Relative Pressure Sensor $100.00
Model 224xLC Automotive Chassis Dynamometer
Optional Accessories
Model 424x All-Wheel Drive Chassis Dynamometer
MODEL 424X STANDARD FEATURES AND EQUIPMENT
• Measures up to 1,500hp+ and 200mph
• Tests vehicles in either two-wheel or all-wheel drive modes
• Above-Ground or Pit installation accessories included
• Consists of two Model 224x chassis dynamometers
• WinPep 7 Software and Hardware to interface (PC, printer, etc. not included)
• Automatic Conditions Measurement (absolute pressure, air temp, humidity)
• Ignition wire inductive tachometer pickup leads
• Auto Tie Down Package (straps, ratchets and ground hooks)
• Wheel Chocks
• Air Actuated Brake System
• Remote Software and Brake Control Pendant
• Installation and operation manuals
• One year replacement parts warranty
• Toll-free technical support
Model 424x $60,000.00
2006 Automotive Dynamometer Price List ADDLR - Page 4
All prices subject to change without notification. All prices in U.S. Dollars. Shipping not included.
Model 424x All-Wheel Drive Chassis Dynamometer
D y n a m o m e t e r a n d D i a g n o s t i c T e s t E q u i p m e n t
Optional Accessories
Item Detail Price
Air/Fuel Ratio Monitor Measures real-time air/fuel ratio using $2,995.00
high-flow pump w/ sample tube or bung
Optical RPM Pickup Includes magnetic base, optical sensor and reflective $300.00
tape. Recommended when testing diesel engined vehicles
Analog Module Expansion module allows datalogging (4) 0-5v channels $750.00
• 0-50psi Absolute Pressure Sensor $100.00
• 0-100psi Relative Pressure Sensor $100.00
Rotary Four-Post Lift Four-post lift used to raise and lower vehicle for use with an above-ground $4,000.00
(SM-123) installed dynamometer. Lift will also function independently from the dyno.
Eddy Current Load Control Includes the eddy current absorption unit, torque cell, and dynamic load control $15,000.00
software. Perform loaded tests, including step, sweep, and closed loop.
Available for front, rear or both.
2006 Automotive Dynamometer Price List ADDLR - Page 5
All prices subject to change without notification. All prices in U.S. Dollars. Shipping not included.
D y n a m o m e t e r a n d D i a g n o s t i c T e s t E q u i p m e n t
Item Detail Price
Air/Fuel Ratio Monitor Measures real-time air/fuel ratio using high-flow pump w/ sample tube or bung $2,995.00
Optical RPM Pickup Includes magnetic base, optical sensor and reflective $300.00
tape. Recommended when testing diesel engined vehicles
Analog Module Expansion module allows datalogging (4) 0-5v channels $750.00
• 0-50psi Absolute Pressure Sensor $100.00
• 0-100psi Relative Pressure Sensor $100.00
Rotary Four-Post Lift Four-post lift used to raise and lower vehicle for use with an above-ground $4,000.00
(SM-123) installed dynamometer. Lift will also function independently from the dyno.
Model 424xLC2 All-Wheel Drive Chassis Dynamometer
Optional Accessories
MODEL 424XLC2 STANDARD FEATURES AND EQUIPMENT
• Measures up to 1,500hp+ and 200mph
• Tests vehicles in either two-wheel or all-wheel drive modes
• Two Eddy Current Load Absorption Units, Torque Cell, and dynamic load control software. Perform
loaded tests, including step, sweep, and closed loop
• Above-Ground or Pit installation accessories included
• Consists of two Model 224xlc chassis dynamometers
• WinPep 7 Software and Hardware to interface (PC, printer, etc. not included)
• Automatic Conditions Measurement (absolute pressure, air temp, humidity)
• Ignition wire inductive tachometer pickup leads
• Auto Tie Down Package (straps, ratchets and ground hooks)
• Wheel Chocks
• Air Actuated Brake System
• Remote Software and Brake Control Pendant
• Installation and operation manuals
• One year replacement parts warranty
• Toll-free technical support
Model 424xLC2 $79,995.00
Model 424xLC2 All-Wheel Drive Chassis Dynamometer
MODEL 248X STANDARD FEATURES AND EQUIPMENT
• Measures up to 2,000hp+ and 200mph
• WinPep 7 Software and Hardware to interface (PC, printer, etc. not included)
• Automatic Conditions Measurement (absolute pressure, air temp, humidity)
• Ignition wire inductive tachometer pickup leads
• Auto Tie Down Package (straps, ratchets and ground hooks)
• Wheel Chocks
• Air Actuated Brake System
• Remote Software and Brake Control Pendant
• Installation and operation manuals
• One year replacement parts warranty
• Toll-free technical support